Difficulty
Moderate
Steps
4
Time Required
- Upgrades, Modifications and Tips 4 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Quiz
0
-
-
Remove the borosilicate glass from your printer.
-
Test fit the PEI on the bed glass so you see how it will fit.
-
Thoroughly clean both sides of the glass with isopropyl alcohol and dry with a lint-free cloth.
-
Peal away about 2cm (1") of backing from one edge of the PEI and attach it to the glass. position the PEI as precisely as you can - once the adhesive touches the glass, it can't be moved.
-
-
-
Insert wisdom here.
-
-
-
The PT100 probes are much more accurate than a thermistor and can handle temperatures up to 400°C for printing high temp materials like Delrin and Polycarbonate.
-
-
-
Insert wisdom here.
-
