Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 79 —

Step Type:

Drag to rearrange

This step's for you Dan!

Notice the gap between the top of the endstop switch bracket and the bottom of the top cross member in the first photo. In order to get the maximum print height, we'll re-position the endstops to minimize that gap.

Loosen the screw securing the endstop bracket and slide the bracket up. There needs to be a little clearance for the wiring coming out of the top of the tower slot so leave a gap of about 2mm as shown in the second photo.

Repeat this process for the other tower endstop brackets.

Your contributions are licensed under the open source Creative Commons license.