Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 53 —

Step Type:

Drag to rearrange

Locate the FSR Kit bag and remove the JohnSL board (aka FSR Controller).

Mount the JohnSL to the bracket with an M3 Washer and M3 x10 Socket Head Cap Screw at each of the two mounting positions as shown in the second photo.

Mount the Duet Brackets to the base using four M5x10 Low Profile Socket Head screws as shown in the third photo.

Loosely attach both arms on one side first. Then slide the bracket to position the other side's arms to align with the base cross member.

Your contributions are licensed under the open source Creative Commons license.