Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 49 —

Step Type:

Drag to rearrange

Clear the two attachment holes in the printed Fan Shroud with an X-acto knife or 5mm drill.

Do not remove both PSU fan attachment screws at the same time or the fan will fall into the PSU.

Remove the PSU fan screw nearest the corner as shown in the second photo and attach the Fan Shroud as shown.

Remove the second PSU fan screw. Then rotate the Fan Shroud into position and attach it to the PSU with the screw as shown in the third photo.

Your contributions are licensed under the open source Creative Commons license.