Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 22 —

Step Type:

Drag to rearrange

Push the cross members flat to the table and then tighten the six screws closest to the table shown in red in the photo.

Tighten the six upper screws closest to you shown in blue in the photo.

Then tighten the six screws nearest you located inside the corner brackets as shown in the second photo..

Flip the assembly over and tighten the remaining six screws inside the corner brackets.

Make sure all twenty-four screws are tight.

Lay the top on the flat surface with the XYZ labels facing up and test to see if it rocks or tips. If so, you need to loosen all of the screws and repeat this step again! So best to work carefully and get it right the first time.

Your contributions are licensed under the open source Creative Commons license.