Site Navigation

Your Account

Choose Language

Help
Editing Step 2 —

Step Type:

Drag to rearrange

Locate three printed carriage bodies in box B and the bag labeled Motion MagBall from box C.

Note: If you have a D300VS+, see carriage instructions here instead.

Find the OpenBuild wheels, magball, and hardware bags in the Motion MagBall bag.

Inspect the carriages for loose plastic, burrs and other artifacts. Trim with an X-acto™ knife if necessary. DO NOT clean out the magball holes with a drill, they are sized to be a tight fit.

The second photo shows all the parts required to assemble one carriage. You should have three sets of these parts.

Your contributions are licensed under the open source Creative Commons license.