Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Gather parts for this step.

The three top corner brackets from Box B.

Twenty-four LPSH and twenty-four T-nuts from the Frame Hardware bag.

Label the brackets X, Y and Z with a small piece of masking tape. The hole in the bracket cross piece is the mounting location for the idler pulley and must face downwards as shown in the photo.

Attach eight T-nuts with low profile socket head screws (LPSH) to each corner bracket as shown.

The raised center side of the T-nut must face out as shown in the photo.

Your contributions are licensed under the open source Creative Commons license.