Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Installing the Belt Tensioner
[* orange] Insert an ''M3 nut'' in the three ''belt tensioners'' as shown in the first photo.
[* orange] Slide the ''tensioner'' into the dovetail slot at the top of the ''carriage''.
[* icon_note] The nut should be oriented away from the top of the ''carriage''. the first photo shows the correct orientation.
[* orange] Insert an ''M3x20 SHCS'' into the hole between the ''ball studs''. Use an Allen wrench to start the screw into the captive nut in the ''tensioner''. Only thread on one or two turns.
[* orange] Complete assembly of all three ''carriages'' as shown in the third photo.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added