Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Nikolaus

Edit approved by Nikolaus

Deleted
Added
Unchanged

Step Lines

[title] Installing the Wheels
[* orange] Add three wheels and lock nuts from step 2.
[* icon_note] If the washer between the bearings moves off center and you can't get the axelaxle through, just use a pen tip or small screwdriver to push it back in place.
[* icon_note] If the washer between the bearings moves off center and you can't get the axelaxle through, just use a pen tip or small screwdriver to push it back in place.
[* black] Tighten the nut with an 8mm wrench and 3mm Allen wrench.
[* icon_note] Make sure the wheel can spin without being loose or so tight that the bearings feel like they are grinding.
[* icon_reminder] Confirm the black mark on the offset spacer is correctly positioned after you tighten the lock nut.
[* orange] Repeat for the other 2 carriages.