Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Titan Aero Assembly
[* orange] Install the large ''acetal gear'' as shown and described in the E3D guide.
[* orange] Insert the ''M3 grub/set screw'' in the ''steel pinion gear'' and slide it on the stepper motor shaft with the screw facing closest to the stepper. This is described in detail in the E3D guide.
[* orange] Align the top surfaces of the ''acetal'' and ''steel gears'' as shown and tighten the grub/set screw.
[* icon_note] You can access the grub/set screw through the slot in the effector as shown in the first photo.
[* orange] Assemble the ''idler lever'' and ''thumbscrew'' as described in the E3D guide.
[* icon_note] You will have to loosen the ''M3 screw'' (circled in red) in order to insert the ''idler lever''.
[* orange] Insert the ''bearing'' in the ''heatsink'' as shown in the third photo.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added