Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Attach Heater Block to Heat Sink
[* icon_caution] It is important to assemble the ''heater block'' to the ''heat sink'' with the correct orientation as shown in the photo.
[* icon_note] If your ''heater block'' does not align as shown, you can slightly loosen the brass ''nozzle'' and position the ''heater block''. Then re-tighten the ''nozzle''.

Image 1

No previous image