Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #27

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Routing the Wiring
[* red] Route all of the wires from the hot end, part cooling fans and heat exchanger cooling fan as shown in the secondfirst photo. Then affix them to the wiring post on the effector with two small Zip Ties.
[* red] The second photo shows a side view of the wire routing.
[* red] Route all of the wires from the hot end, part cooling fans and heat exchanger cooling fan as shown in the secondfirst photo. Then affix them to the wiring post on the effector with two small Zip Ties.
[* red] The second photo shows a side view of the wire routing.

Image 1

No previous image

Added

Image 2

No previous image

Added