Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Install the Extruder Stepper
[* red] Carefully push the ''stepper motor'' all the way to the ''extruder body''. Attach it to the ''extruder body'' with two ''M3x25 SHCS'' and ''M3 nuts'' as indicated by the red arrows.
[* icon_note] Make sure the set screw remains visible and the groove in the drive gear stays aligned with the filament path as shown.
[* red] Tighten the set screw (blue arrow) securely.
[* icon_note] The second photo shows the correct orientation for the wiring harness.

Image 1

No previous image

Added

Image 2

No previous image

Added