Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Install Extruder and Idler Bearings
[* red] Insert one ''624ZZ bearing'' with am ''M4 washer'' on either side into one of the bearing slots as shown in the photo.
[* red] Use an Allen wrench to align the washers with the bearing hole and the holes in the ''extruder body''.
[* red] Attach the bearing with an ''M4x20 SHCS'' and ''M4 nut'' as shown in the second photo,
[* red] Repeat the above steps to assemble the second bearing in the other slot.
[* red] Install a bearing with an M3 washer on either side in the ''idler'' as shown in the third photo.