Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Attach Extruder Body to Effector
[* red] Attach the extruder body to the effector with two'' M3x16 screws'' and ''M3 washers'' as shown in the photo. The slots for the idler bearings must be oriented as shown.
[* icon_note] Attach the screw that aligns with the captured nut you installed in the previous step first. Use a screw driver to help hold the nut in place and adjust its position if necessary.
[* red] Once the first screw is installed, install the second screw. Then tighten both screws securely.

Image 1

No previous image