Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Install the Mag Balls
[* icon_caution] Do not ream the holes for the ''mag balls'' in the ''effector''. They are designed to be a tight fit in order to maintain alignment.
[* red] Install six ''M3 nuts'' into the six nut traps on the bottom of the effector.
[* red] Use an ''M3x16mm SHCS'' to draw and seat the nuts fully into the nut traps as shown in first and second photos.
[* red] Screw the ''Mag Balls'' on finger tight.
[* red] Carefully tighten the ''Mag Balls'' with a 1/4 turn using a 12mm10mm wrench or socket. Do not over tighten or you may strip the threads.
[* red] Carefully tighten the ''Mag Balls'' with a 1/4 turn using a 12mm10mm wrench or socket. Do not over tighten or you may strip the threads.