Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Reaming Extruder
[* red] Use a 2mm drill bit in either a pin vise or electric drill to ream the filament path in the ''extruder body''.
[* icon_note] Make sure to ream all the way through and out the other sidefrom both directions as shown in the second photo.
[* icon_note] Make sure to ream all the way through and out the other sidefrom both directions as shown in the second photo.