Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #81

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Commissioning...
[* black] Insert wisdom herered] Before working on the new stuff, let's verify that the endstops and steppers are still operating properly. Re-do ''Steps 59'',. ''60'' and optionally ''Step 61'' before proceeding.
[* icon_note] Everything check out OK? Great, lets get started.
[* red] Open a web browser and load the DWC. Notice the temperature displays for the Heater 1 (hot end) and Bed temperatures. These should display reasonable room temperature values. For example, 20*C (68*F). It's ok if the temperatures are off by a few degrees and also if they are not identical
.
[* black] Insert wisdom herered] Before working on the new stuff, let's verify that the endstops and steppers are still operating properly. Re-do ''Steps 59'',. ''60'' and optionally ''Step 61'' before proceeding.
[* icon_note] Everything check out OK? Great, lets get started.
[* red] Open a web browser and load the DWC. Notice the temperature displays for the Heater 1 (hot end) and Bed temperatures. These should display reasonable room temperature values. For example, 20*C (68*F). It's ok if the temperatures are off by a few degrees and also if they are not identical
.