Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #75

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] JohnSL connection and wire tidying
[* red] Connect the ''JohnSL'' board to the ''Duet'' as shown in the first photo. The red wire in the the three wire cable should be to the left on both the ''JohnSL'' and ''Duet''.
[* red] The two pair of fan wires can be routed in the lower channel on the '''X-Z''' cross member and fastened with a short piece of ''T-slot cover'' as shown in the second photo. Use a smalllarge ''Zip Tie'' to attach the wires to the ''Duet mount arm'' as indicated by the blue arrow.
[* red] The two pair of fan wires can be routed in the lower channel on the '''X-Z''' cross member and fastened with a short piece of ''T-slot cover'' as shown in the second photo. Use a smalllarge ''Zip Tie'' to attach the wires to the ''Duet mount arm'' as indicated by the blue arrow.