Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #74

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Connecting whip wiring
[* red] Connect the ''extruder stepper motor'' connectors marked '''A''' and '''B''' as shown in the first photo. The black wire must be on the left side for both connectors.
[* red] Connect the hot end and part cooling fan connectors as shown in the second photo. The red (+) wire must be on the left side.
[* icon_note] From left to right you should have: 1) the part cooling fan, 2) the hot end fan and 3) the LED connectors.
[* red] Connect the hot end thermistor and cartridge heater as shown in the third photo. Polarity does not matter on these connections.
[* icon_caution] Double check all of your connections against the photo.
[* red] Tidy up the whip wiring using the small Zip Ties as seen in the photos.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added