Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #68

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Cleaning up the bottom-side wiring
[* black] Insert wisdom hereicon_note] For this step I laid the printer on its "right" side - the '''Y-Z''' towers are on the table.
[* icon_note] ''Zip Ties'' installed in the previous step are shown as lighter ghosts.
[* red] Secure the '''Z''' ''stepper motor'' wires with another large ''Zip Tie'' as shown by the blue arrow
.
[* black] Insert wisdom hereicon_note] For this step I laid the printer on its "right" side - the '''Y-Z''' towers are on the table.
[* icon_note] ''Zip Ties'' installed in the previous step are shown as lighter ghosts.
[* red] Secure the '''Z''' ''stepper motor'' wires with another large ''Zip Tie'' as shown by the blue arrow
.

Image 1

No previous image

Added