Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #76

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Prepare heated bed
[* black] Insert wisdom herered] Remove the white protective film from the ''aluminum heat dissipator''. Clean the surface with window cleaner and allow to dry.
[* red] Start pealing the protective film from the edge of the ''Kapton bed heater'' as shown (to the left of the wiring). ++Do not remove the film completely++.
[* red] Start adhering the ''Kapton bed heater'' to the edge of the ''heat dissipator ''working from one edge. After the edge is adhered, continue to slide the backing off of the ''heater'' as you smooth and adhere the ''heater'' to the ''dissipator'' as shown in the second photo.
[* red] Connect the heated bed wires to the green terminal block on the left side of the ''Duet'' as shown in the third photo.
[* icon_note] Make sure to complete open the terminal connector by unscrewing the terminal screws as you did for the main power connector in Step 58.
[* red] Connect the thermistor to the thermistor connector on the left side of the ''Duet''
.
[* black] Insert wisdom herered] Remove the white protective film from the ''aluminum heat dissipator''. Clean the surface with window cleaner and allow to dry.
[* red] Start pealing the protective film from the edge of the ''Kapton bed heater'' as shown (to the left of the wiring). ++Do not remove the film completely++.
[* red] Start adhering the ''Kapton bed heater'' to the edge of the ''heat dissipator ''working from one edge. After the edge is adhered, continue to slide the backing off of the ''heater'' as you smooth and adhere the ''heater'' to the ''dissipator'' as shown in the second photo.
[* red] Connect the heated bed wires to the green terminal block on the left side of the ''Duet'' as shown in the third photo.
[* icon_note] Make sure to complete open the terminal connector by unscrewing the terminal screws as you did for the main power connector in Step 58.
[* red] Connect the thermistor to the thermistor connector on the left side of the ''Duet''
.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added