Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #67

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Install FSRs
[* blackred] Prepare the three ''FSRs'' by adhering a ''silicone pad'' to the center of the top and bottom of the pad as shown in the first photo.
[* icon_note] The ''FSRs'' do have adhesive protected with brown film on their bottom side but do not use this adhesive.
[* red] Install the three ''FSR wiring harnesses'' on the ''FSRs''. Polarity does not matter.
[* red
] Insert wisdom herethe ''FSRs'' into their ''mounting blocks'' with the right side ("top" in first photo) up as shown in the second photo. Orient the ''FSR'' connector and wires as shown.
[* red] Secure the ''FSR'' wires in the upper cross member using a ~40mm (1.5") piece of T-slot cover as shown in the second photo
.
[* blackred] Prepare the three ''FSRs'' by adhering a ''silicone pad'' to the center of the top and bottom of the pad as shown in the first photo.
[* icon_note] The ''FSRs'' do have adhesive protected with brown film on their bottom side but do not use this adhesive.
[* red] Install the three ''FSR wiring harnesses'' on the ''FSRs''. Polarity does not matter.
[* red
] Insert wisdom herethe ''FSRs'' into their ''mounting blocks'' with the right side ("top" in first photo) up as shown in the second photo. Orient the ''FSR'' connector and wires as shown.
[* red] Secure the ''FSR'' wires in the upper cross member using a ~40mm (1.5") piece of T-slot cover as shown in the second photo
.

Image 1

No previous image

Added

Image 2

No previous image

Added