Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #55

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Connecting endstops
[* red] Remove the pins and three ''3-position connectors'' from the ''Duet Wifi Connectors'' bag.
[* red] Strip the ends of the wires and crimp the terminal pins on them. Push the pins into the ++two outer terminal positions++.
[* icon_note] Polarity doesn't matter for these mechanical endstop switch connections.
[* red] Repeat ''Step 53'' and ''54'' to route and secure the wiring with two pieces of ''T-slot cover''. Then attach the '''Y''' endstop to the '''Y''' connector as shown in the second photo. Note that it is the middle one of the three.
[* red] Repeat ''Step 53'' and ''54'' to route and secure the wiring with two pieces of ''T-slot cover''. Then attach the '''X''' endstop to the '''X'' connector. s shown in the third photo.
[* icon_caution] Pay attention to hook the '''X''' and '''Y''' endstop switches to the the correct terminals as shown in the third photograph.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added