Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Add T-nuts to the X assembly
[* red] The X assembly gets six T-nuts.
[* red] ThreeInsert three T-nuts go onin the ''top slot'' of the upper cross member.
[* red] OneInsert one T-nut goes in the inside slot of the upper cross member.
[* red] TwoInsert two T-nuts go in the inside slot of the lower cross member.
[* red] ThreeInsert three T-nuts go onin the ''top slot'' of the upper cross member.
[* red] OneInsert one T-nut goes in the inside slot of the upper cross member.
[* red] TwoInsert two T-nuts go in the inside slot of the lower cross member.
[* icon_caution] Check your work for this and the next two steps to make sure you have the T-nuts in the correct locations. But don't worry, Ultibots includes a few ''insert T-nut'' spares that can be added even after the frame is assembled.