Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Add T-nuts to the X assembly
[* blackred] The X assembly gets fivesix T-nuts.
[* black] Two

[* red] Three
T-nuts go on the ''top slot'' of the upper cross member.
[* red] One T-nut goes in the inside slot of the upper cross member.
[* red]
Two moreT-nuts go in the ''outside slot''inside slot of the lower cross member.
[* black] One T-nut goes onicon_caution] Check your work for this and the ''inside slot'' ofnext two steps to make sure you have the upper cross memberT-nuts in the correct locations. But don't worry, Ultibots includes a few ''insert T-nut'' spares that can be added even after the frame is assembled.
[* blackred] The X assembly gets fivesix T-nuts.
[* black] Two

[* red] Three
T-nuts go on the ''top slot'' of the upper cross member.
[* red] One T-nut goes in the inside slot of the upper cross member.
[* red]
Two moreT-nuts go in the ''outside slot''inside slot of the lower cross member.
[* black] One T-nut goes onicon_caution] Check your work for this and the ''inside slot'' ofnext two steps to make sure you have the upper cross memberT-nuts in the correct locations. But don't worry, Ultibots includes a few ''insert T-nut'' spares that can be added even after the frame is assembled.

Image 1

Old Version

New Version

Image 2

Deleted