Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #49

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Installing the fan shroud
[* red] Clear the two attachment holes in the printed ''Fan Shroud'' with an X-acto lifeknife or 5mm drill.
[* red] Clear the two attachment holes in the printed ''Fan Shroud'' with an X-acto lifeknife or 5mm drill.
[* icon_caution] Do not remove both PSU fan attachment screws at the same time or the fan will fall into the PSU.
[* red] Remove the ''PSU'' fan screw nearest the corner as shown in the second photo and attach the ''Fan Shroud'' as shown.
[* red] Remove the second ''PSU'' fan screw. Then rotate the ''Fan Shroud'' into position and attach it to the ''PSU'' with the screw as shown in the third photo.