Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #48

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Wiring the PSU
[* red] Install the wiring as shown in the first photo. The green ('''G'''round), white (Neutral) and black ('''L'''ine) wires are the US color designation for AC wiring. The pair of black and red wires on the right supply 24VDC to the printer.
[* icon_note] Don't forget to install the short black jumper connecting the ''Snap-in Switch'' to the ''IEC Receptacle''.
[* red] Close the protective amber plastic cover as shown in the second photo.
[* red] Attach the ''PSU Cover'' to the ''PSU'' using two ''M3x10 Socket Head Cap Screws'' and ''M3 Washers'' as shown in the third photo.