Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #47

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] PSU Cover preparation
[* red] Insert two ''M3 Nyloc'' nuts in the ''PSU cover'' as shown in the first photo.
[* red] Install the ''IEC receptacleReceptacle'' using two ''M3x10 Socket Head Cap Screws''.
[* red] Install the ''IEC receptacleReceptacle'' using two ''M3x10 Socket Head Cap Screws''.
[* red] Install the ''Snap-in Switch'' orienting the '''0''' (off) position as shown in the second photo.
[* red] Install two ''M3 Nyloc'' nuts as shown in the third photo.