Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #38

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Completing the LED strip installation
[* icon_note] The wires running up the '''Z''' column will connect to ++one++ of the ''LED strips'' at the '''Z''' corner, no connections are made to the other end.
[* red] Choose one ''LED strip'' at the '''Z''' corner and tin its terminal pads. This will make soldering the wiring to the strip easier once the top is installed.
[* red] Locate the roll of 6mm (1/4") Kapton tape. Gently lift the end of each ''LED strip'' at each corner and put two strips underneath the terminal pads to insulate them. See (A) in the first photo.
[* red] Now tape over the all the terminal pads ++except the tinned pads at the '''Z''' corner++ with two strips of Kapton tape. See (B) in the first photo and the second photo for the '''Z''' terminal pads.

Image 1

No previous image

Added

Image 2

No previous image

Added