Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #36

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Installing the LEDs
[* red] Locate the six printed ''LED retainer clips'' in box B and the three ''LED strips'' in the ''LED Lighting'' bag.
[* red] Turn the top unit over so the labels you applied to the ''corner brackets'' face down.
[* icon_caution] Note that the terminals at each end of the ''LED strip'' are marked positive (+) and negative (-). You ++must align++ the installed strips so the (+) and (-) terminals align with each other as shown in the second photo.
[* red] Peal the protective film off the back on one ''LED strip'' and install it on the ''cross member'' as shown.
[* red] Apply the remaining two ''LED strips'' making sure to align the (+) and (-) terminals as shown.
[* red] Install two ''LED retainer clips'' on each ''LED strip'' closest to the end of the strip as possible as shown in the photo.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added