Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #31

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Endstop wiring completion
[* red] Pull the ''endstop wirewires'' out of the bottom of the tower extrusion until the other end (white connectors) are about 40mm (1.5") shorter than the tower length as shown in the photo.
[* red] Insert one of the plastic ''T-slot covers'' you removed from the tower slots earlier. InsertSlide the end about 1cm (1/22cms (1") into the corner extrusion.
[* red] Continue installing the ''T-slot cover'' in the slot until you reach near the top. Stop slightly belowCut the connectors.
[* icon_note] Leave
T-slot cover 60mm (2-3/8") from the ''T-slot cover'' extending beyond the topend of the tower for now, we'll trim it to fit lateras shown.
[* red] Install the ''endstop wirewires'' in the '''Y''' tower and install the ''T-slot cover'' in the same way.
[* red] Install the ''endstop wirewires'' in the '''Z''' tower but ++do not install the T-slot cover++.
[* red] Pull the ''endstop wirewires'' out of the bottom of the tower extrusion until the other end (white connectors) are about 40mm (1.5") shorter than the tower length as shown in the photo.
[* red] Insert one of the plastic ''T-slot covers'' you removed from the tower slots earlier. InsertSlide the end about 1cm (1/22cms (1") into the corner extrusion.
[* red] Continue installing the ''T-slot cover'' in the slot until you reach near the top. Stop slightly belowCut the connectors.
[* icon_note] Leave
T-slot cover 60mm (2-3/8") from the ''T-slot cover'' extending beyond the topend of the tower for now, we'll trim it to fit lateras shown.
[* red] Install the ''endstop wirewires'' in the '''Y''' tower and install the ''T-slot cover'' in the same way.
[* red] Install the ''endstop wirewires'' in the '''Z''' tower but ++do not install the T-slot cover++.

Image 2

Old Version

New Version

Image 3

Old Version

New Version