Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #58

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Power up and first movement!
[* red] TBDAttach the power cord to the power supply. Make sure the switch is in the OFF position and then plug it in. Turn on the power supply and watch and listen for any indications that connections weren't made correctly.
[* icon_caution] Immediately '''SHUT DOWN''' and '''UNPLUG''' the power supply if you smell or see smoke or hear unusual pops or noises. Contact UltiBots Support for assistance if
[* red] Once powered up, connect to the Duet from your web browser. You will need to know the IP address it was assigned.
[* red] TBDAttach the power cord to the power supply. Make sure the switch is in the OFF position and then plug it in. Turn on the power supply and watch and listen for any indications that connections weren't made correctly.
[* icon_caution] Immediately '''SHUT DOWN''' and '''UNPLUG''' the power supply if you smell or see smoke or hear unusual pops or noises. Contact UltiBots Support for assistance if
[* red] Once powered up, connect to the Duet from your web browser. You will need to know the IP address it was assigned.