Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #57

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Connect LEDs and power supply
[* red] Connect the LED wring as shown in the first photo. This will be a temporary connection to test, we'll install the proper connection later.
[* icon_note] Make sure to connect with the (+) terminal to the left and (-) to the right as shown in the photo.
[* icon_caution] Before proceeding make sure the power supply is not plugged in.
[*
red] Connect the power supply wires to the power terminal. Noteterminal as shown in the second photo. The black (-) wire connects to the top terminal position indicated with the black arrow and the positive (+) wire to the lower positionposition indicated by the red arrow.
[* icon_caution] Before proceeding make sure the power supply is not plugged in.
[*
red] Connect the power supply wires to the power terminal. Noteterminal as shown in the second photo. The black (-) wire connects to the top terminal position indicated with the black arrow and the positive (+) wire to the lower positionposition indicated by the red arrow.
[* icon_caution] Double check the power supply connection to make sure the polarity is correct. Nasty things will happen if you reverse the wiring and turn on the power.