Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing corner brackets for assembly
[* black] Locate the ''Frame Hardware'' bag (box C). Note that there are two types of screws - one is a lowscrews: forty-eight low profile socket head screws (LPSH) and the other atwelve flat socket head (taperedscrews (tapered) (FSH).
[* icon_caution] You will use thetwenty four low profile socket head screws (LPSH) and twenty four ''T-nuts'' for this step.
[* blackorange] Insert eight flat head screws into the holes in the corner bracket and secure with a T-nut with two turns of the nut.
[* black] Locate the ''Frame Hardware'' bag (box C). Note that there are two types of screws - one is a lowscrews: forty-eight low profile socket head screws (LPSH) and the other atwelve flat socket head (taperedscrews (tapered) (FSH).
[* icon_caution] You will use thetwenty four low profile socket head screws (LPSH) and twenty four ''T-nuts'' for this step.
[* blackorange] Insert eight flat head screws into the holes in the corner bracket and secure with a T-nut with two turns of the nut.
[* icon_note] The raised hole side of the T-nut should face out as shown in the second photo.