Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Preparing corner brackets for assembly
[* black] Locate the Frame Hardware bag. Note that there are two types of screws - one is a low profile head and the other a flat head (tapered).
[* icon_caution] You will use the low profile head screws for this step.
[* black] Insert eight flat head screws into the holes in the corner bracket and secure with a T-nut with two turns of the nut.
[* icon_note] The raised hole side of the T-nut should face out as shown in the second photo.

Image 1

No previous image


Image 2

No previous image