Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing corner brackets for assembly
[* black] Locate the ''Frame Hardware'' bag (box C). Note that there are two types of screws: forty-eight low profile socket head screws (LPSH) and twelve flat socket head screws (tapered) (FSH).
[* icon_cautionicon_note] You will use twenty fourtwenty-four low profile socket head screws (LPSH) and twenty fourtwenty-four ''T-nuts'' for this step.
[* orangered] Insert eight flat head screws into the holes in theeach corner bracket and secure with a T-nut with two turns++two turns++ of the nut.
[*

[*
icon_note] The raised holecenter side of the T-nut shouldmust face out as shown in the second photo.
[* icon_cautionicon_note] You will use twenty fourtwenty-four low profile socket head screws (LPSH) and twenty fourtwenty-four ''T-nuts'' for this step.
[* orangered] Insert eight flat head screws into the holes in theeach corner bracket and secure with a T-nut with two turns++two turns++ of the nut.
[*

[*
icon_note] The raised holecenter side of the T-nut shouldmust face out as shown in the second photo.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added