Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #51

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Prepare Duet Wifi
[* icon_caution] Please ground yourself before handling the ''Duet Wifi'' and all electronic devices as they can be damaged by electrostatic discharge.
[* red] Locate the ''Duet Wifi'' wrapped in its pink electrostatic protective bubble wrap in box '''C''' and the ''Duet Wifi Connectors'' bag.
[* icon_note] The developers of DuetDuet, and the RepRapFirmware it usesuses, maintain an active documentation wiki and discussion forum. It is the best place to go to learn and ask questions. Familiarize yourself with the ''Duet Wifi'' and its capabilities on their [https://duet3d.com/wiki/Hardware_overview|Hardware Overview|new_window=true] page.
[* icon_note] The developers of DuetDuet, and the RepRapFirmware it usesuses, maintain an active documentation wiki and discussion forum. It is the best place to go to learn and ask questions. Familiarize yourself with the ''Duet Wifi'' and its capabilities on their [https://duet3d.com/wiki/Hardware_overview|Hardware Overview|new_window=true] page.
[* icon_caution] Please see [https://duet3d.com/wiki/Prerequisites_for_using_the_Duet_WiFi|Prerequisites for using the Duet Wifi|new_window=true] to make sure you have everything ready to go. Your Duet Wifi is preloaded with the current UltiBots-supported firmware. Do not upgrade your firmware if a new version is available until you have completely commissioned your D300VS and you understand how and why you are upgrading.
[* red] Download and install the latest release of Pronterface (aka Printrun). You can get it here: [http://kliment.kapsi.fi/printrun/|Pronterface installers|new_window=true].
[* red] You will use the instructions [https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi|Getting Connected to the Duet Wifi|new_window=true] to connect ''Duet'' to your Wifi network. The first step of the process is slightly different for Windows and Mac/Linux users:
[* icon_note] Windows computers need to install the Duet drivers. Scroll down to the ''Step-by-step guide'' and complete ''Step 1''. Skip ''Step 2 ''and then complete ''Steps 3 to 15'' before continuing here. Mac and Linux computers do not need to install a driver. Scroll down to the ''Step-by-step guide'' and complete ''Steps 3 to 15'' before continuing here.
[* icon_caution] Make a note of the IP address assigned to your Duet in ''Step 11'' of the [https://duet3d.com/wiki/Getting_connected_to_the_Duet_WiFi|Getting Connected to the Duet Wifi|new_window=true], you will need it to connect to your printer later.