Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Assemble steppers to base corner brackets
[* black] Gather the parts for this step.
[* orange] Three ''base corner brackets'' are the larger set of brackets.Thebrackets in box '''(B)'''. The smaller set are the ''top corner brackets''.
[* orange] Three ''stepper motorsmotors'' from box '''(C)'''.
[* orange] Remove the following parts from the bag labeled ''Motion MagBall'' in box '''(C)'''. The ''NEMA Hardware'' bagparts are listed on the bag label.
[* orange] Twelve ''M3x8 SHCS - Motors''.
[* orange] Three ''GT2 16 Tooth Pulleys''
.
[* black] ++Loosely++ attach a ''pulley'' to each of the stepper motor shaftsshafts using a 1.5mm Allen wrench. The thin flange should face away from the stepper as shown in the photo.
[* black] Orient the wiring coming out of the stepper to face up as shown and attach to the corner bracket using twofour ''M3x8 SHCS'' screws for each assembly. Use a 2.5mm Allen wrench, a ball head Allen wrench makes this a lot easier.
[* orange] Three ''base corner brackets'' are the larger set of brackets.Thebrackets in box '''(B)'''. The smaller set are the ''top corner brackets''.
[* orange] Three ''stepper motorsmotors'' from box '''(C)'''.
[* orange] Remove the following parts from the bag labeled ''Motion MagBall'' in box '''(C)'''. The ''NEMA Hardware'' bagparts are listed on the bag label.
[* orange] Twelve ''M3x8 SHCS - Motors''.
[* orange] Three ''GT2 16 Tooth Pulleys''
.
[* black] ++Loosely++ attach a ''pulley'' to each of the stepper motor shaftsshafts using a 1.5mm Allen wrench. The thin flange should face away from the stepper as shown in the photo.
[* black] Orient the wiring coming out of the stepper to face up as shown and attach to the corner bracket using twofour ''M3x8 SHCS'' screws for each assembly. Use a 2.5mm Allen wrench, a ball head Allen wrench makes this a lot easier.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added