Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Wheel assembly
[* red] Insert one of the ''M5 wheel axel screws'' into the carriage as shown. The photo shows the assembly order for the wheel. There is a setEach of the ''Open Builds wheel ''bags contains the parts for one wheel in each of the ''Open Builds wheel ''bags.
[* red] Insert one of the ''M5 wheel axel screws'' into the carriage as shown. The photo shows the assembly order for the wheel. There is a setEach of the ''Open Builds wheel ''bags contains the parts for one wheel in each of the ''Open Builds wheel ''bags.
[* icon_reminder] The assembly order is spacer-bearing-Delrin™ wheel-spacer washer-bearing-lock nut
[* icon_note] Note that there is an extra washer in the ''Open Builds wheel ''bag. You will not need this washer.
[*
red] The second photo shows the ''spacer'', first ''bearing'' and ''wheel'' installed. It is easiest to assemble the wheels on the M5 Axel this wayscrew as shown, the screw helps hold things in alignment.
[* icon_note] Note that there is an extra washer in the ''Open Builds wheel ''bag. You will not need this washer.
[*
red] The second photo shows the ''spacer'', first ''bearing'' and ''wheel'' installed. It is easiest to assemble the wheels on the M5 Axel this wayscrew as shown, the screw helps hold things in alignment.
[* icon_note] It may take a little finger pressure to press the bearings into the wheel. Try to keep the bearing and wheel aligned as you do this and it should press in.
[* red] The ''spacer washer'' must be placed between the bearings inside the wheel. This spacer prevents the wheel from crushing when you tighten the nut. The photo shows the spacer installed.
[* icon_caution] Don't forget to install the spacer washer!