Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Wheel assembly
[* red] Insert one of the ''M5 wheel axel screws'' into the carriage as shown. The photo shows the assembly order for the wheel. There is a set of parts for one wheel in each of the ''Open Builds wheel ''bags.
[* icon_reminder] The assembly order is spacer-bearing-Delrin™ wheel-spacer washer-bearing-lock nut
[* red] The second photo shows the ''spacer'', first ''bearing'' and ''wheel'' installed. It is easiest to assemble the wheels the M5 Axel this way, the screw helps hold things in alignment.
[* icon_note] It may take a little finger pressure to press the bearings into the wheel. Try to keep the bearing and wheel aligned as you do this and it should press in.
[* red] The ''spacer washer'' must be placed between the bearings inside the wheel. This spacer prevents the wheel from crushing when you tighten the nut. The photo shows the spacer installed.
[* icon_caution] Don't forget to install the spacer washer!

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added