Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Carriage preparation
[* red] Locate three printed carriage bodies in box B and the bag labeled ''Motion MagBall'' from box C.
[* red] Locate the carriage parts bag shown in the photo and findFind the ''OpenBuild wheels'', ''magball'', and ''hardware'' bags shown in the ''Motion MagBall'' bag.
[* red] Locate the carriage parts bag shown in the photo and findFind the ''OpenBuild wheels'', ''magball'', and ''hardware'' bags shown in the ''Motion MagBall'' bag.
[* icon_caution] Inspect the carriages for loose plastic, burrs and other artifacts. Trim with an X-acto™ knife if necessary. ++Do NOT++ clean out the magball holes with a drill, they are sized to be a tight fit.
[* red] The second photo shows all the parts required to assemble one carriage. You should have three sets of these parts.