Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Assemble carriages
[* red] Locate three printed carriage bodies in box B and the bag labeled ''Motion MagBall'' from box C.
[* red] Locate the carriage parts bag shown in the photo.
[* icon_caution] Inspect all printed parts for loose plastic, burrs and other artifacts. Trim with an X-acto™ knife if necessary. On all printed parts ++except the carriages++, check any through holes to make sure they are clean. If not, use an appropriately sized drill bit to clear them.