Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing the base and top assemblies
[* red] Gather twelve ''flat socket headFSH ''screws and twelve ''T-nuts'' from the ''Frame Hardware'' bag.
[* red] Gather twelve ''flat socket headFSH ''screws and twelve ''T-nuts'' from the ''Frame Hardware'' bag.
[* red] Loosely install two screws and ''T-nuts'' in the holes for the tower extrusion slot in each corner bracket in both the base and top assemblies. The ''T-nut'' goes inside the slot.
[* icon_note] The raised center side of the ''T-nut'' must be oriented as shown in the photo.
[* icon_reminder] There should be three ''T-nuts'' left from the ''Frame Hardware ''bag. These will be used to mount the endstops in an upcoming step.