Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Michael Hackney

Edit approved by Michael Hackney


Step Lines

[title] Preparing the base and top assemblyassemblies
[title] Preparing the base and top assemblyassemblies
[* red] Gather twelve ''flat socket head ''screws and twelve T-nuts from the ''Frame Hardware'' bag.
[* red] Loosely install two screws and T-nuts in the holes for the tower extrusion slot in each corner bracket in both the base and top assemblies. The T-nut goes inside the slot.
[* icon_note] The raised center side of the T-nut must be oriented as shown in the photo.
[* icon_reminder] There should be three T-nuts left from the ''Frame Hardware ''bag. These will be used to mount the endstops in an upcoming step.