Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing the base and upper assembly
[* red] Gather twelve ''flat socket head ''screws and twelve T-nuts from the ''Frame Hardware'' bag.
[* red] Loosely install two screws and T-nuts in the holes for the tower extrusion slot in each corner bracket. The T-nut goes inside the slot.
[* icon_note] The raised center side of the T-nut must face out as shown in the photo.