Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #19

Edit by Nikolaus

Edit approved by Nikolaus

Deleted
Added
Unchanged

Step Lines

[title] Add T-nuts to the Z cross member
[* red] The '''Z '''assembly gets two ''T-nuts''.
[* red] Insert two ''T-nuts'' into the ++lower inside++ slot of the cross member.
[* icon_note] There are no ''T-nuts'' inserted in the '''Y''' assemblyassembly unless you are using a [guide|10|Paneldue|stepid=159].
[* icon_note] There are no ''T-nuts'' inserted in the '''Y''' assemblyassembly unless you are using a [guide|10|Paneldue|stepid=159].