Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing the top corner brackets
[* red] Gather parts for this step.
[* red] The three ''top corner brackets'' from Box B.
[* red] Twenty-four ''LPSH'' and twenty-four'' T-nuts'' from the ''Frame Hardware ''bag.
[* icon_caution] Label the brackets '''X''', '''Y''' and '''Z''' with a small piece of masking tape. The hole in the bracket cross piece is the mounting location for the idler pulley and ++must face downwards++ as shown in the photo.
[* red] Attach eight ''T-nuts'' with ''FHS'' (''flatlow profile socket head screws'')screws (LPSH)'' to each corner bracket as shown.
[* red] Attach eight ''T-nuts'' with ''FHS'' (''flatlow profile socket head screws'')screws (LPSH)'' to each corner bracket as shown.
[* icon_note] The raised center side of the ''T-nut'' must face out as shown in the photo.