Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing the top corner brackets
[* red] Gather parts for this step.
[* red] The three ''top corner brackets'' from Box B.
[* red] Twenty-four low profile socket head screws (LPSH)''LPSH'' and twenty-four T-nutstwenty-four'' T-nuts'' from the ''Frame Hardware ''bag.
[* red] Twenty-four low profile socket head screws (LPSH)''LPSH'' and twenty-four T-nutstwenty-four'' T-nuts'' from the ''Frame Hardware ''bag.
[* icon_caution] Label the brackets '''X''', '''Y''' and '''Z''' with a small piece of masking tape. The hole in the bracket cross piece is the mounting location for the idler pulley and ++must face downwards++ as shown in the photo.
[* red] Attach eight T-nuts''T-nuts'' with flat''FHS'' (''flat head screwsscrews'') to each corner bracket as shown.
[* icon_note] The raised center side of the T-nut''T-nut'' must face out as shown in the photo.
[* red] Attach eight T-nuts''T-nuts'' with flat''FHS'' (''flat head screwsscrews'') to each corner bracket as shown.
[* icon_note] The raised center side of the T-nut''T-nut'' must face out as shown in the photo.