Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Preparing the upper corner brackets
[* red] Gather parts for this step.
[* red] The three ''upper corner brackets'' from Box B.
[* red] Twenty-four low profile socket head screws (LPSH) and twenty-four T-nuts from the ''Frame Hardware ''bag.
[* redicon_caution] Label the brackets X, Y and Z with a small piece of masking tape. The hole in the bracket cross piece ++must face downwards++ as shown in the photo.
[* redicon_caution] Label the brackets X, Y and Z with a small piece of masking tape. The hole in the bracket cross piece ++must face downwards++ as shown in the photo.
[* red] Attach eight T-nuts with flat head screws to each corner bracket as shown.
[* icon_note] The raised center side of the T-nut must face out as shown in the photo.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added